Plastic elbow glands
The elbow glands were designed for applications where the cable must enter the panel or machine parallel to its surface, in order to prevent sharp bending or to improve ingress protection against water, dust, etc. Elbow angle is 90 degrees.
The elbow connectors unique 90 degrees connectors are provided with the same metric thread – one male, one female – at each end, thus permitting installation of a metric cable gland at right angle from the surface of the panel or machinery.
Plastic elbow glands
Pg 7 Plastic Elbow 90-Degree Cable Gland, Black, Range 4-8mm
images/5/dim/plastic-gland-elbow.jpg
Pg 9 Plastic Elbow 90-Degree Cable Gland, Black, Range 4-8mm
images/5/dim/plastic-gland-elbow.jpg