SKT Safety Switch with Actuator Key
- Details
- Category: News
- Published on Wednesday, 02 January 2019 13:47
- Hits: 658
The SKT 30mm plastic safety switches by BERNSTEIN, available in Canada from ITC, are the smallest models offering positive opening, and a choice of 1NO+1NC contacts or 2NC contacts.
These are typical double-insulated door safety switches, with a separate actuator key. They are particularly designed for applications where space limitations impose the use of a very compact switch. The operating head can be rotated at 90 degrees steps.
SKT switches are CSA certified, and are rated 250V, 10A, ingress protection IP65, temperature range -30 to +80˚C, mechanical life 1x106 operations. RoHS compliant.
To download the catalog describing the SKT safety limit switch and other Bernstein limit switches, click here.
2018 Year in Review
- Details
- Category: News
- Published on Tuesday, 04 December 2018 10:26
- Hits: 529
In 2018 ITC added many new and exciting products. This catalog gives an overview of many of the new and/or improved products that ITC now carries. If you order any of these products before January 25 2019, you will save $25 on your order (special limited to one per customer).
To download a copy of the 2018 Year in Review catalog, click here.
Filter Fans and Vents for Industrial Control Panels
- Details
- Category: News
- Published on Tuesday, 30 October 2018 14:21
- Hits: 810
ITC presents a complete line of Filtered Fans and Vents as manufactured by DBK Thermal Management UK.
Filter Fans are suitable for use in electrical cabinets and enclosures in which excessive heat develops due to the high density of equipment. Overheating can cause damage to the components inside.
Properly selected fans and vents circulate air through the enclosure by drawing in cooler air from the outside and forcing warm air out.
Read more: Filter Fans and Vents for Industrial Control Panels
Plastic Holders Designed to hold Documents Inside a Panel
- Details
- Category: News
- Published on Tuesday, 09 October 2018 09:08
- Hits: 542
ITC now presents two sizes of economical document holders, designed to keep diagrams, instructions, certificates at hand when working in an electric panel. Model 111.201 is 267x267mm wide, 27 mm deep (approx. 10.5x10.5x1”) and are appropriate to hold letter size documents. Model 111.202 is 200x200x27mm (approx. 7.5x7.5x1”) and accommodates small booklets or folded sheets.
Both are made of sturdy polyamide, black (orange upon special request), and come with adhesive tape for installation. Large widows on the front allow full visibility of the contents.
To download the ITC flyer describing these products limit switches, click here.
Metal, Single, Double and Triple Foot Switches
- Details
- Category: News
- Published on Thursday, 04 October 2018 16:20
- Hits: 608
The popular metal foot switches manufactured in Germany by BERNSTEIN are designed to operate under the most demanding environmental conditions and are ideal for installation on the shop floor, to control machine tools, lifting and conveying devices, where hands-free operation is required.
Ray Vasconcelos
- Details
- Category: News
- Published on Thursday, 06 September 2018 09:52
- Hits: 528
We are pleased to introduce Ray Vasconcelos, as our new Sales Representative for Southwestern Ontario.
Ray brings to ITC 20-years’ experience both in Canada and in South America, in the fields of sales and sales management, as well as three years with ITC in Customer Service.
Visit ITC at the Plant Expo in Kitchener
- Details
- Category: News
- Published on Wednesday, 05 September 2018 10:03
- Hits: 508
We welcome you to stop by our booth at the PLANT Expo Wednesday October 10, 2018 at Kitchener’s Bingemans Centre. The show runs from 10:00 am to 4:00 pm. We would enjoy showing off our new products to you, and spending some time catching up. We look forward to seeing you there!
VanGuard MFM – The DIN mounted ammeter with fuse holder
- Details
- Category: News
- Published on Tuesday, 21 August 2018 12:06
- Hits: 627
An easy way to measure the current, and at the same time add fuse protection inside a control cabinet, is the new VanGuard MFM.
The compact, DIN mounted module accepts a 'midget' (13/32”x1-1/2” or 10x38mm) fuse, or a 'CC' fuse. The fuse (not supplied) us under a protective cover secured by a screw, making the unit fully touch safe.
Fuses up to 25A can be used. The analog ammeter (scale 0-30A) is connected in series to the fuse via a transformer. Termination is via screw terminals for 26-10AWG wire.
Read more: VanGuard MFM – The DIN mounted ammeter with fuse holder
Temporary and Permanent Cut-Out and Hole Plugs
- Details
- Category: News
- Published on Tuesday, 21 August 2018 11:54
- Hits: 633
Do you need to plug a hole in your panel, the cable passage in an installed cable gland, or one of the holes in a multi-hole seal of a gland? ITC has the solution.
For temporary or permanent closing of round cut-outs on metal or plastic, in all sizes (metric, NPT, Pg), select the threaded stopping plugs in fiberglass-reinforced polyamide or in nickel plated brass, with the corresponding locknuts. For more information, click here.
DIN mounted GFCI dual outlet
- Details
- Category: News
- Published on Tuesday, 21 August 2018 11:41
- Hits: 614
The most recent addition to the DINLET line of DIN rail mounted power outlets is the new GFCI module.
Along with the convenience of providing a 120V, 15A power source inside a control, distribution panel, this model offers ground fault protection. The operator is now protected against accidental contact with a live wire in any equipment connected to the unit.
Rated 120V, 60Hz, 15A, the GFCI outlet comes with an “OUT” connector, allowing installation of an additional outlet, which will also be protected by the same unit. The outlet is equipped with TEST and RESET buttons, and a green LED indicates the outlet’s status.