Hand Hydraulic Crimping Tools
- Details
- Category: News
- Published on Tuesday, 15 October 2019 10:30
- Hits: 788
Two new hand hydraulic crimping tools for use with large non-insulated terminals ('power lugs') - 10 to 400 mm2 (8 AWG to 750 MCM) - have recently been added to the lineup of tools available from stock at ITC.
The new tool 240R (ITC Part No. 502.551K) is a 5 ton / 52kN manual-hydraulic tool, which uses interchangeable dies from 10 to 240mm2 (8AWG to 500 MCM). It is supplied in a sturdy plastic case, without dies, which can be purchased separately, as single items or as a complete set of 7.
Punch/Die Sets for Rectangular Connectors
- Details
- Category: News
- Published on Tuesday, 15 October 2019 10:00
- Hits: 946
With the addition of 3 new models, ITC now has a complete series of Punch/Die sets designed to punch square/rectangular holes in mild steel plate (up to 3.0mm thickness), of the exact dimensions of any of the popular multipole industrial connectors on the market.
Cut-outs made with these die sets guarantee precise and constant dimensions, and the operation is faster, safer than using a drill and/or a saw. No burrs or sharp edges are present along the cuts.
30mm Metal Control and Signalling Devices
- Details
- Category: News
- Published on Sunday, 13 October 2019 12:00
- Hits: 883
ITC has added to its line of 22.5mm control devices, a family of 30mm models. These larger components are still popular in panels – for example – in the automotive industry, and as replacement items.
Each device comprises an actuator and at least one contact.
Insulated jumpers (busbars) for Fuse Holders and Circuit Breakers
- Details
- Category: News
- Published on Monday, 12 August 2019 12:00
- Hits: 860
ITC now offers a new series of insulated copper jumpers (busbars), designed to jumper modular fuse holders, Miniature Circuit Breakers (MCBs), and any other modular device with a pitch of 17.5-18mm.
Read more: Insulated jumpers (busbars) for Fuse Holders and Circuit Breakers
Tower Lights with 1 to 5 Layers
- Details
- Category: News
- Published on Monday, 12 August 2019 12:00
- Hits: 800
Tower lights (also called 'stack lights' or 'beacons') are used as an efficient signalization and visual alarm device in fields as varied as robotics, packaging, food industry, access control in industrial and commercial areas, safety and security, etc. |
New 22.5mm Joysticks
- Details
- Category: News
- Published on Thursday, 08 August 2019 09:49
- Hits: 912
ITC introduces the ECX4500 line of panel Joysticks, for mounting in a 22.5mm cut-out. This family consists of 21 different models - 10 of them with a short lever (55mm total) and 10 with a long lever (79mm), plus a wobble-joystick.
They can be supplied with different operation modes:
- "Zero" plus one position, maintained or non-maintained
- "Zero" plus two positions, maintained or non-maintained
- "Zero" plus four positions, maintained or non-maintained
The 55 and 79mm joysticks are supplied with a mounting collar and the appropriate number of contact blocks, already mounted.
32A - Manual Motor Starters
- Details
- Category: News
- Published on Tuesday, 18 June 2019 13:56
- Hits: 861
The new NOARK 32A Manual Motor Starters provide in one compact DIN-Rail mounted device, manual motor isolation and control as well as motor protection. The following functions are included in this unit:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- Disconnect for Motor Branch Circuit
- Manual Motor Control
- Overload Thermal Protection
- Branch-Circuit Short Circuit Magnetic Protection
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
As required by North American Standards and Electric codes, each individual Motor Branch Circuit must be protected by a Fuse, Circuit Breaker or by a Self-protected Combination controller. The new 32A “Ex9S32” provides these protections, and can be used in both “Type E” or “Type F” (coupled with contactor) combinations.
New DIN Rail & DIN Rail Cutter Catalogs
- Details
- Category: News
- Published on Tuesday, 18 June 2019 13:32
- Hits: 794
New, easier to use DIN Rail and DIN Rail Cutter catalogs are now available.
For the new DIN Rail catalog click here.
The DIN Rail Cutter catalog has a selection guide, making the decision process simple for you. For the new DIN Rail Cutter catalog click here.
Shirt Giveaway
- Details
- Category: News
- Published on Thursday, 13 June 2019 10:09
- Hits: 832
Get a 25th anniversary shirt!
Founded in 1994, ITC is celebrating its’ 25th year. While supplies last, ITC is giving away a free Dryblend Jersey polo shirt with orders over $250.
Details of Giveaway
|
Safety Door Interlock Switch 'SLC'
- Details
- Category: News
- Published on Monday, 10 June 2019 11:15
- Hits: 318
A new generation of safety mechanical interlock switches, 'SLC' is being introduced by BERNSTEIN in Germany, and distributed by ITC in Canada.
These switches provide robust electro-mechanical locking of doors, covers, protection grilles, etc., while also remote monitoring access status and offering optional emergency opening from inside or outside the enclosure.
SLC switches feature a sturdy thermoplastic body and a metal head, designed to accept entry from 4 sides and from top (user-configurable) of the corresponding 'key' actuator. There are 2 types of operation possible: 'power-to-unlock' (the internal solenoid is powered to unlock)or 'power-to-lock' (lock is released when power is cut). A safety release operated by a screwdriver is present on the front (exterior of enclosure); optionally, this can be modified into an accessory handle. Inside the enclosure, an optional escape release handle enables immediate opening in case of emergency.