NewsRelay Modules
- Details
- Category: News
- Published on Monday, 29 June 2015 14:05
- Hits: 1046
Two new compact, economical DIN rail mounted relay modules are now available at ITC.
Small relay modules are extremely popular, used as interface between PLCs and other control components, and the respective controlled devices (loads).
Part No. 491.095 is a 10A relay, with 1NO+1NC contact (Form C).
Part No. 419.036 is a 3A relay, with 1 NO contact only (Form A).
PMX PV Fuse Holders
- Details
- Category: News
- Published on Monday, 29 June 2015 13:57
- Hits: 1005
These fuse holders, rated 1000V DC, 30A (CSA/UL), have been developed to offer a compact, safe and convenient protection for photovoltaic applications. It is in fact common for such installations, to have no-load DC voltages in excess of 800V: the combined use of the new PMX "PV" devices and of the photovoltaic-rated corresponding fuses (also available at ITC) provides the approved level of protection for solar equipment and panels.
Modern compact design, coupled with the use of high quality materials (silver plated copper contacts, thermoplastic resins with high temperature resistance and self-extinguishing) make the new fuse holders the choice for new and existing solar panels.
Manual Motor Starters on DIN Rail, 25A
- Details
- Category: News
- Published on Monday, 29 June 2015 13:53
- Hits: 1401
ITC introduces a new line of DIN rail mounted miniature motor starters, rated up to 25A.The new manual starters offered by ITC (Type Ex9SN25) can be used to operate motors up to a maximum of 20HP (600VAC, three-phase).
The design of these devices is very compact - only 44mm (~1.75") of DIN rail are taken by one starter.
Two models are available: with two buttons (ON-OFF), and with padlockable rotary handle. 14 different overload settings are available from stock for each type, from 0.10-0.16A to 20-25A. Rated voltage 600V (cULus), ambient rated temperature -20 to +55°C, Ingress protection IP20. Several accessories are available, including auxiliary contacts and undervoltage release modules.
NEW - Hinged Cover Compact Metal Bulkhead Enclosures
- Details
- Category: News
- Published on Monday, 29 June 2015 13:46
- Hits: 893
As part of ILME's wide range of 3-pole to 8-pole connectors, ITC introduces the new metal bulkhead housings with hinged covers. With IP44 protection (IP67 with additional optional seal), the new enclosures provides extra protection for externally mounted connectors, in the most diverse environments, without the need of a separate tethered cover.
Different models are provided for male and for female inserts, and both are available with galvanized steel closing levers, or with stainless steel levers and rollers.
Read more: NEW - Hinged Cover Compact Metal Bulkhead Enclosures
Aluminium industrial enclosures Series CA
- Details
- Category: News
- Published on Thursday, 14 May 2015 16:08
- Hits: 1004
The new CA enclosures manufactured in Germany by BERNSTEIN and distributed in Canada exclusively by ITC are designed to contain and protect sensitive electrical, electronic, control and pneumatic components, even in harsh environments. They are made of diecast aluminum (Al Si 12), with factory-injected seal of polyurethane, offering IP66 ingress protection (optionally IP67) and excellent resistance to salt water and most chemical products. They are also suited for use in potentially explosive atmosphere.
NQ3 Electromagnetic Starters
- Details
- Category: News
- Published on Thursday, 14 May 2015 15:38
- Hits: 954
A new family of direct-on-line motor starters from 9 to 32A has been added to the vast range of components, controls and accessories offered by ITC.
The different components for the starters: housings (complete with on/off buttons and pre-terminated wires and jumpers), contactors and overload relays are supplied separately, and can be assembled extremely easily and rapidly by the user. This means that parts inventory is greatly reduced, and that exchange or replacement of the components can be done in a matter of minutes.
For more details click here, or This email address is being protected from spambots. You need JavaScript enabled to view it. .
For the available models of contactors and overload relays, click here.
The new ENCLOSURES catalog by ITC is available
- Details
- Category: News
- Published on Thursday, 14 May 2015 15:11
- Hits: 1155
These include polycarbonate and polystyrene enclosures, with transparent or solid cover, up to 360x254x165mm (~15"x10"x6"), polycarbonate or polyester boxes with hinged solid or transparent covers up to 600x800x280mm (~ 24"x31"x11"), diecast aluminum enclosures up to 600x310x180mm (~ 24"x12"x7"), as well as back plates and numerous accessories.
Polyester boxes are appropriate for outdoor applications.
For more details click here, or contact ITC.
New L Lever Limit switch
- Details
- Category: News
- Published on Friday, 10 April 2015 08:00
- Hits: 1675
Introducting our 40mm body, two-circuit double-break limit switch, with L lever.
Max rating: 10A.
Download the catalog here.
ITC / Bernstein Partnership
- Details
- Category: News
- Published on Tuesday, 20 January 2015 10:00
- Hits: 2084
ITC Electrical Components is proud to announce that BERNSTEIN AG of Porta Westfalica, Germany has appointed ITC as their exclusive Canadian distributor.
New PMX series fuse holders
- Details
- Category: News
- Published on Wednesday, 17 December 2014 13:18
- Hits: 1569
The PMX series, a new, improved family of fuse holders, replaces the current “DF” models currently sold (PMF series).
The new models feature a number of improvements and new accessories, without changes in size or installation characteristics. All the new series of PMX fuse holders are UL or UR and CSA certified.
