NewsFerrules in Slide-Boxes and dispensers
- Details
- Category: News
- Published on Friday, 18 January 2013 05:47
- Hits: 1231
ITC's ferrules (cord end connectors) can also be supplied in convenient kits, dispensers as well as in our unique "Slide-Boxes". Kits (either with or without a crimping tool) and dispensers are practical solutions for everyday use, either in the shop or in the field.
MSD terminal blocks for printed circuit board
- Details
- Category: News
- Published on Friday, 18 January 2013 05:41
- Hits: 1380
Type MSD terminal blocks for printed circuit board have the smallest pitch available on the market (2.54mm = 1/10").
The main feature of this series of high quality printed circuit board (PCB) terminal blocks is their small size. They are ideally suited for all applications where an extremely small footprint is required, while
Flexible Wire Duct
- Details
- Category: News
- Published on Friday, 18 January 2013 05:38
- Hits: 1792
"CANALFLEX®" the flexible Wire Duct
When managing your wiring inside a control panel or a machine requires to follow complex paths or connecting to a moving element (e.g.: a door) CANALFLEX® may be the answer. CANALFLEX® is an extremely flexible wire duct which can be bent to sharp angles without the risk of damage to the wires, or to the wire duct itself.
Colour-coded Power Lugs
- Details
- Category: News
- Published on Friday, 18 January 2013 05:35
- Hits: 1254
ITC's "C39" series terminals are manufactured from electrolytic copper tube, annealed to obtain optimum ductility, which is a requirement for the connectors to withstand the mechanical stress occurring during compression.
"NIMBUS" PTC Panel Heaters
- Details
- Category: News
- Published on Friday, 18 January 2013 05:31
- Hits: 1653
Type “Nimbus” and "Cirrus" PTC Heating Elements
ITC presents a line of innovative convection heaters and contact heating elements by DBK® based on PTC (“Positive Temperature Coefficient”) technology.
Unlike traditional heating elements that use a resistance wire to generate heat, PTC heating elements are barium titanate ceramic stones. These elements have unique properties as semiconductors, which can be precisely determined during their design.
Custom Cut DIN Rail
- Details
- Category: News
- Published on Friday, 18 January 2013 05:27
- Hits: 1444
ITC Offers custom cut DIN rail
ITC offers its Customers a practical and economical way to obtain quality cut DIN Rail in a very short time.
If you have a requirement for a number of identical pieces of DIN Rail cut and punched according to your specifications, contact ITC possibly with a drawing, and indicating the following:
Aluminum Pushbutton Enclosures
- Details
- Category: News
- Published on Friday, 18 January 2013 05:26
- Hits: 1446
Type TE Aluminum Pushbutton Enclosures
A new line of heavy-duty diecast aluminum enclosures for standard 22.5mm Ø control devices such as pushbuttons, selectors, pilot lights, emergency stop buttons, etc.. Available with one, two, three or four in-line holes. Ingress protection IP65 (similar to NEMA 4X).
Insulators
- Details
- Category: News
- Published on Tuesday, 15 January 2013 08:58
- Hits: 1557
Standoff Insulators for use in control panels and machinery.
ITC offers a line of standoff insulators, designed to support and insulate components and equipment inside a machine, or a control or distribution panel.
